Answers are grounded in this paper and cite their sources.
Paper packaging coated with synthetic materials raises major environmental and health concerns. As a response, new promising approaches consist of using sustainable coatings based on nano‐biocomposites. In this work, polylactic acid (PLA)/organoclays (OC) aqueous dispersions thickened by xanthan gum were applied on paper using the bar coating technique. Morphological and topographical analyses using scanning electron microscopy and laser confocal microscopy showed a smooth polymeric layer completely covering the fibrous and porous surface of the paper, resulting in a substantial improvement in the barrier properties. Water vapor transmission rates and water absorptivity had undergone a major decrease when coatings containing 3 and 5 wt% OC were used, while no significant difference was observed between the 1 wt% OC formulation and pure PLA. Moreover, coated paper showed no air porosity with 0 mL/min values recorded for all samples, thus confirming the morphology observations of the surfaces and cross‐sections. Additionally, the contact angle measurements indicated a slight decrease in the hydrophobicity of the base paper when coated with PLA and 1 wt% OC. However, this reduction was reversed with the addition of 3 and 5 wt% OC, restoring the hydrophobicity. Highlights Polylactic acid (PLA)/organoclay (OC) coatings sealed and covered completely the paper's surface. Water resistance of the base paper had a major improvement due to the coatings. The porous surface of the paper was successfully sealed, leading to no air porosity. Adding 3 and 5 wt% OC resulted in excellent barrier performances. PLA/OC coatings have the potential to replace synthetic paper coatings.
No takes yet. Share an insight, caveat, or question.
Abdenour et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: