Answers are grounded in this paper and cite their sources.
The selection of reinforcing materials and their ranges of dispersion play a crucial role in tailoring the properties of metal matrix composites (MMCs) by altering their structural behavior. This research aimed to experimentally investigate the influence of reinforcing elements such as graphite and boron carbides on the mechanical properties of aluminum 6061 MMCs (AMCs). The elements were mixed through a ball milling process and AMCs were reinforced at different weights from 2 to 8% with equal ranges of increments through the stir casting process. The mechanical properties of the fabricated AMCs were tested according to ASTM standards and the AMCs with 6% weight fractions exhibited the highest improvements of 28.7, 39.72 and 23.5% compared to the base material, reaching 211.8 MPa, 2959.05 MPa, 0.66 Kg-m and 74.59 VHN for ultimate strength, compressive strength, impact strength and hardness, respectively. The characterization performed through the SEM technique revealed the fine dispersion of reinforcing elements at interstitial layers and XRD techniques revealed the growth of the Orowan mechanism obtained through the grain refinement in the AMC. Using the performed quantitative analysis, correlations were developed among the tested mechanical properties in the B4C-Gr-based AMCs.
No takes yet. Share an insight, caveat, or question.
Mahendra rao Teella (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: