Answers are grounded in this paper and cite their sources.
We studied a surface modification technique for indium tin oxide (ITO) anodes without precleaning and resist banks for manufacturing organic light-emitting diodes (OLEDs) by inkjet printing. The ITO surface modified by inductively coupled plasma (ICP) with an optimized CF 4 /O 2 (7:3) gas mixture improved both its hydrophilicity and its work function, while the resist surface treated by the plasma became hydrophobic. The resist and ITO surfaces treated by plasmas of various gas mixtures (i.e., CF 4 , CF 4 /Ar (1:2), CF 4 /O 2 ( x :1; x =1, 7/3, 4, and 9) were analyzed by X-ray photoelectron spectroscopy (XPS) of the C 1s, F 1s, O 1s, and In 3d 5/2 core levels. On the uncleaned ITO surfaces modified by CF 4 /O 2 plasmas, organic contaminants were removed more efficiently and the deposition of CF x on the remaining contaminants decreased with increasing oxygen. The amount of F in the form of InF x increased using the CF 4 /O 2 (7:3) plasma in comparison with that using the CF 4 /Ar and CF 4 plasmas. We investigated the effect of adding oxygen to CF 4 on the change in gaseous species produced in the plasma chamber by mass spectrometry. In the CF 4 /O 2 (7:3) plasma, the peak intensities of F + , HF + , F 2 + , O + , and O 2 + were higher than those in the CF 4 plasma. The results suggest that In 2 O 3 was generated by the oxidation of indium with O, and InF x was generated by the fluoridation of indium with HF. By introducing InF x onto ITO surfaces using the CF 4 /O 2 plasma, the hole-injection energy barrier could be reduced.
No takes yet. Share an insight, caveat, or question.
Ikagawa et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: