Answers are grounded in this paper and cite their sources.
Purpose of this study was to evaluate the distribution of bone tension around single implants with different С/I ratio (1.5:1, 1.75:1, 2:1) according to the von Mises criterion. Stress analysis was performed using Invesalius 3.0, Rhinoceros 3D 4.0 software. Three 3D models of the mandibular segment of the bone block were developed: model A, a short implant (6 mm) C/I -1.5:1; model B, a short implant (6 mm) C/I -1.75:1; model C, a short implant (6 mm) C/I -2:1. The results were evaluated: the cumulative frequency of implant engraftment, MBL changes around the implant, follow up for 5 years. Under axial load, the highest stresses were concentrated at the abutment/implant junctions, the highest stresses were 67.94 MPa C/I -1.5:1, 68.09 MPa C/I -1.75:1 and 68.24 MPa C/ I -2:1, respectively. The results of the current study, indicate the increase in crown height showed little difference in load at the crown/implant interface with crown/implant ratios of 1.5:1, 1.75:1 and 2:1. In vivo finite element analysis (FEA) study showed that short implantats are successful regardless the C/I ratio. Use of shorts implants for prosthetic rehabilitation can be considered favorable and well substantiated.
No takes yet. Share an insight, caveat, or question.
Gagik Hakobyan (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: