Answers are grounded in this paper and cite their sources.
In this paper, the authors propose a mechanically flexible direct conversion x-ray detector as a potential solution for portable and conformal digital x-ray imaging. It consists of a micropillar structured layer of 100-μm-thick amorphous selenium (a-Se) on a flexible thin film transistor (TFT) backplane with a pixel size of 70 μm as a substrate. The flexible substrate is made of an optically transparent polyimide with a heat resistance of more than 200 °C. It is bonded on a glass carrier for rigid substrate handling during the amorphous silicon (a-Si) TFT process. Separating the flexible substrate from the glass carrier is partly facilitated by a debonding layer sandwiched between them. A two-dimensional electrical simulation analysis revealed a possible charge generation and collection mechanism within the micropillared a-Se layer. An x-ray image captured by the curved flexible detector indicated that a pillarlike a-Se conversion layer can be used to perform x-ray imaging. This is, to the best of our knowledge, the first demonstration of a flexible digital x-ray direct conversion detector.
No takes yet. Share an insight, caveat, or question.
Kuo et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: