Answers are grounded in this paper and cite their sources.
Intumescent coatings enhance the fire resistance of steel structures by forming a thermal protective char when exposed to fire. Thereby, significantly slowing the rise in steel temperature. However, environmental conditions can cause ageing of the intumescent coating, potentially reducing its thermal protection performance. Therefore, the durability of intumescent coatings is checked as part of the European assessment and the approval procedure. The assessment primarily relies on accelerated artificial ageing tests followed by fire testing. The corresponding test and assessment programme is designed to ensure a working life of at least 10 years. If the working life has expired or there are concerns about the coating´s performance, a coated steel member from the existing structure can be extracted and tested in a fire laboratory. However, this approach is rarely used in practice due to its destructive nature and high cost. Since a visual inspection is not sufficient to determine the effectiveness of the intumescent coating in case of fire, there is a practical need for a minimally invasive, in situ test method. The development of a mobile prototype furnace for in situ testing to assess the actual fire protection performance of the intumescent coating has already been described by the authors. The current paper presents the test results obtained from uncoated and coated steel plates, as well as IPE and HEB sections. Particular attention is given to the influence of the specimen geometry, dry film thickness, heating regime, and heat transition within the specimen on the resulting steel temperature and char morphology.
No takes yet. Share an insight, caveat, or question.
Fürst et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: