Answers are grounded in this paper and cite their sources.
New designs are proposed for 2×2 electro-optical switching in the 1.3–12 μm wavelength range. Directional couplers are analyzed using a two-dimensional effective-index approximation. It is shown that three or four side-coupled Si or Ge channel waveguides can provide complete crossbar broad-spectrum switching when the central waveguides are injected with electrons and holes to modify the waveguides’ core index by an amount Δn+iΔk. The four-waveguide device is found to have a required active length L that is 50% shorter than L for the three-waveguide switch. A rule of ΔβL>28 for 3w and ΔβL>14 for 4w is deduced to promise insertion loss <1.5 dB and crosstalk <−15 dB at the bar state. At an injection of ΔNe=ΔNh=5×1017 cm−3, the predicted L decreased from ∼2 to ∼0.5 mm as λ increased from 1.32 to 12 μm. Because of Ge’s large Δk, the Ge bar loss is high in 4w but is acceptable in 3w.
No takes yet. Share an insight, caveat, or question.
Richard Soref (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: