Answers are grounded in this paper and cite their sources.
This study investigates two incorporation techniques for integrating high concentrations (2–6 wt%) of industrial-grade mass-produced graphene into glass fibre-reinforced unsaturated polyester composites to create multiscale composites with enhanced functionality. The incorporation methods compared were direct mixing of graphene into the resin matrix and spray coating of graphene suspension onto fibre surfaces, along with a hybrid approach combining both techniques. A fabrication methodology for the multiscale composites was developed to address processing challenges associated with high graphene concentrations and increased resin viscosity. Mechanical characterization revealed that flexural strength and modulus decreased by up to 15 % and 9 %, respectively, with fibre-coated composites showing greater deterioration than resin-mixed samples. In contrast, interlaminar shear strength (ILSS) increased by up to 12 % when graphene was directly mixed into the resin, due to toughening of resin-rich mid-plane in the laminate structure. Fibre coating, however, resulted in reduced mechanical properties due to impaired resin infiltration and increased void content, as confirmed by optical microscopy and permeability measurements, which showed a decrease from 1.3 × 10⁻¹¹ m² for the neat preform stack to 3.8 × 10⁻¹² m² for the fibres coated with 4 wt% graphene. Electrical conductivity analysis demonstrated that graphene-coated fibre multiscale composites achieved the lowest percolation threshold at 2.7 wt%, compared to 3.1 wt% for resin-modified composites, attributed to preferential localisation of graphene along fibre surfaces. These findings provide important insights into the relationship between graphene incorporation technique, resulting microstructure, and composite properties in high-concentration multiscale systems.
No takes yet. Share an insight, caveat, or question.
Karvandian et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: