Answers are grounded in this paper and cite their sources.
This paper describes the results of the development of supported mixed-metal oxide sorbents for hot-gas desulfurization capable of withstanding multiple sulfidation/regeneration cycles at 871 °C (1600 °F). The sorbents consisted of various combinations of copper, molybdenum, and/or manganese oxides supported on a high silica-containing zeolite. These sorbents were tested in a fixed-bed reactor with simulated coal gas at 205 kPa (15 psig). The combination of all three metal oxides displayed synergism in enhancing efficiency for H 2 S removal and improved the crush strength on the pellets. Copper oxide was the most active component for reaction with H 2 S, while molybdenum and manganese oxides appeared to act as catalysts/promoters. During multicycle testing, this ternary metal oxide sorbent retained its reactivity and mechanical strength.
No takes yet. Share an insight, caveat, or question.
Gasper-Galvin et al. (1998) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: