This is the authors' abstract. We don't add key points for this paper.
Highly conductive, uniform, and transparent nitrogen-doped graphene multilayer films were produced by a layer-by-layer (LbL) assembly method. Such a technique was realized by alternate deposition of graphene oxide modified with the cationic surfactant N,N,N-trimethyl-1-dodecanaminium bromide (CTAB) and the anionic surfactant sodium dodecylbenzenesulfonate. In this way, we can achieve a highly conductive (900 S/cm), uniform, and controllable graphene film in terms of thickness, transmittance, and sheet resistance after high-temperature reduction. The improved conductivity is attributed to better graphitization and nitrogen-doping introduced by CTAB. The organic light-emitting diode using such a multilayer graphene film fabricated by the LbL method as an anode obtains higher current density and luminance at low voltage compared to that with an indium-tin oxide (ITO) anode. Moreover, the current efficiency of graphene-based device is comparable to that of an ITO-based device. It is proved that such a nitrogen-doped multilayer graphene film developed by the LbL assembly technique is a promising candidate for a transparent electrode in organic electronics.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: