Answers are grounded in this paper and cite their sources.
Polycrystalline films of Zn- and/or Ni-bearing spinel ferrites were prepared at 80degC by ferrite plating based on an “improved” spray-spin-coating method. A reaction solution with a low pH value (i.e., ∼5.2) was used, thus enabling the use of oxygen-containing water instead of oxygen-free water. This saved the labor of preparing the oxygen-free water. The experimental method is thus “improved” over the previous one which required oxygen-free water. The composition parameter, x, in the Fe3-x Zn x O4 films is much larger than the corresponding one, x', in the reaction solution (x/x'=∼5), while x is smaller than x' in the Fe3-x Ni x O4 films (x/x'=∼0.4). Even prepared at 80degC, all films were of good crystallinity and of good magnetic property comparable to those prepared at higher temperature, as revealed by X-ray, magnetic and Fe57 Mössbauer measurements.
No takes yet. Share an insight, caveat, or question.
Itoh et al. (1988) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: