Answers are grounded in this paper and cite their sources.
Removal of Hg 0 from simulated flue gas by ultraviolet light (UV)/heat/ammonium persulfate process in an UV-impinging stream reactor was investigated for the first time. Experiments were conducted to evaluate the effects of several parameters and gas composition on Hg 0 removal. Mechanism and kinetics of Hg 0 removal were also investigated. The results indicated that Hg 0 removal efficiency was increased by increasing UV radiation intensity, activation temperature, persulfate concentration, and solution circulation rate; was decreased by increasing solution pH and SO 2 concentration; and was not obviously affected by Hg 0 and NO concentrations. Hg 0 was oxidized by four pathways: (A) oxidized by SO 4 –• and • OH that were produced from UV-light activation of S 2 O 8 2–; (B) removed by UV light–water excitation reaction; (C) oxidized by SO 4 –• and • OH that were produced from heat activation of S 2 O 8 2–; (D) oxidized by S 2 O 8 2– . In the four pathways, the “A” pathway plays a major role in the removal of Hg 0, and the other pathways “B–D” only play a complementary role. When C S 2 O 8 2– < 0.06 mol/L or UV radiation intensity < 78 μW/cm 2, the Hg 0 removal process belongs to a moderate speed reaction. Hg 0 removal can be enhanced by simultaneously increasing the mass transfer rate and chemical reaction rate. When C S 2 O 8 2– ≥ 0.06 mol/L and UV radiation intensity ≥ 78 μW/cm 2, the Hg 0 removal process belongs to a fast reaction. Hg 0 removal can be further enhanced by improving mass transfer rate (e.g., increasing gas–liquid contact area and enhancing turbulence in reactor).
No takes yet. Share an insight, caveat, or question.
Liu et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: