Answers are grounded in this paper and cite their sources.
Background: Being healthcare professionals, technicians must be aware of the safe disposal of biomedical waste and the recycling of dental materials to reduce biological risks to the environment. Objectives: Aim of the current study to evaluation the PMMA surface roughness and hardness after recycling and reuse of waste zirconia material from the CAD/CAM production method as effective filler. Materials and Methods: The Zirconia fiber was collected from the CAM machine after the milling procedure. Then, standard sieves for ISO standardization no. 40, 60 and 100 were used respectively to reach a fine grain size of 150μm. Zirconia of 1% wt. it was added to the PMMA resin base of 99% wt., Zirconia of 3% wt. it was added to the PMMA resin base of 97% wt and Zirconia at 5% wt. it has been added to PMMA resin base of 95% wt. to reach a PMMA/Zirconia composite of three different filler ratios then compared with Polymethyl methacrylate without additives. The conventional heat-curing method using a water bath was applied to polymerize the disc samples for both surface roughness and hardness tests. The data of this study are analyzed by One-way ANOVA (post-hoc/Tukey test) performed at a significant P-value of (p≤0.05) and a 95%confidence level. Results: After comparing the results, a significant difference was observed in the surface roughness and hardness of PMMA/5% Zirconia composites compared to other tested groups (p≤0.05). Conclusion: The 1%, 3% and 5% wt. of Zirconia -fibers as a filler would be an effective percentage to decrease the surface roughness of the PMMA 5% wt. of Zirconia -fibers as a filler would be an effective percentage to increase the surface hardness of the PMMA.
No takes yet. Share an insight, caveat, or question.
Dalia Abdul Reda Sadiq (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: