Answers are grounded in this paper and cite their sources.
This paper presents fabrication approaches for magnesium (Mg) microstructures embedded in biodegradable polymers using through-mold Mg electrodeposition and metaltransfer-molding. Biodegradable implantable electronics have garnered increasing interest from the medical community for the monitoring and treatment of transient diseases. Magnesium is a biodegradable metal with desirable properties, and the ability to micropattern Mg thick films (i.e., about >1 μm) with direct microelectromechanical systems (MEMS) integration would support the development of more sophisticated and clinically relevant biodegradable devices and microsystems. Magnesium microstructures were electroplated through micropatterned water-soluble molds in a nonaqueous electrolyte and transfer molded into a biodegradable polymer. Electroplated Mg compared favorably with commercial Mg foil based on elemental composition, crystal orientation, electrical resistivity, and corrosion behavior. Magnesium electroplated to a thickness of up to 50 μm showed a grain size of ~10 μm, and minimum feature dimensions of 100 μm in width and spacing. Completely biodegradable Mg and poly-L-lactic acid constructs were demonstrated. The application of Mg thick films toward biodegradable energy sources was explored through the fabrication and testing of biodegradable Mg/Fe batteries. The batteries exhibited a capacity and power of up to 2.85 mAh and 39 μW, respectively. Results confirmed the advantages of electrodeposited Mg microstructures for biodegradable MEMS applications.
No takes yet. Share an insight, caveat, or question.
Tsang et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: