Answers are grounded in this paper and cite their sources.
To address insufficient n -butane from conventional separation methods, this study investigates the hydroisomerization of isobutane through experiments and thermodynamic analysis, focusing on suppressing isobutene formation to below the industrial threshold of 0.1 %. The Pt/ZSM-22 catalyst exhibited excellent selectivity within the temperature range of 375–485 °C in a 16-channel fixed-bed reactor. Thermodynamic analysis (50–650 °C) confirmed the endothermic nature of the primary reaction and accurately predicted the temperature-dependent variation of isobutene concentration, showing strong agreement with experimental results. The derived optimal conditions (250–450 °C, 3.0 MPa, H 2 /hydrocarbon = 0.5–1.0) ensured the mass fraction of isobutene in products remained less than 0.1 %, providing valuable guidance for industrial process optimization. • Currently, isobutane isomerization reaction is usually catalyzed by Pt supported catalyst with strong acid cite as carriers such as chlorinated alumina (Al 2 O 3 -Cl) or sulphated zirconia (SO 4 2− /ZrO 2 ). But the catalysts can only be used at the temperature lower than 250 °C, which is thermodynamically unfavorable for isobutane isomerization. The development of highly efficient and selective catalysts for isobutane isomerization reaction at high temperature is a challenge in catalysis. • In this communication, we report the hydroisomerization of isobutane to n -butane at the temperature as high as 435 °C over a Pt/ZSM-22 zeolite catalyst, with selectivity to n -butane of 87.91 % at a 45.76 % conversion of isobutane. • Moreover, thermodynamic analysis, using simplified reaction schemes, enables to optimize the reaction conditions of isobutane isomerization reaction and quantify the concentration of the byproduct isobutene accurately.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: