Answers are grounded in this paper and cite their sources.
The valorization of organic wastes in civil engineering is an important sector to the extent that the products to be obtained are not subjected to rigorous quality standards. Among this waste, one distinguishes the scrap bag manufactured out of jute, rejected into nature. This work aims to study the possibility of recycling the waste of jute (after their use) as fibers in the mass of the sand concrete at different percentages (0.15%, 0.30%, 0.45%, and 0.60%) with different lengths (2 cm, 3 cm, and 4 cm). The effect of these fibers on the physical properties (workability and bulk density), mechanical properties (compressive and flexural tensile strengths), and durability properties (capillary water absorption and shrinkage) of different sand concrete was studied. The obtained results showed that the use of jute fibers as an addition contributes to reduce the workability, bulk density, and compressive strength of sand concrete mixture. However, the flexural tensile strength was improved with the addition of up to 0.6% of jute fibers. All jute fibre-based sand concrete mixes exhibit lower capillary water absorption and shrinkage value compared to the control mix. However, all sand concrete based-fiber mixes are classified as acceptable for structural application with water absorption and shrinkage less than 10% and 1000 m/m, respectively.
No takes yet. Share an insight, caveat, or question.
Guendouz et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: