Answers are grounded in this paper and cite their sources.
With Q's in the tens to hundreds of thousands, micromachined vibrating resonators are proposed as integrated circuit-compatible tanks for use in the low phase-noise oscillators and highly selective filters of communications subsystems. To date, LF oscillators have been fully integrated using merged CMOS/microstructure technologies, and bandpass filters consisting of spring-coupled micromechanical resonators have been demonstrated in a frequency range from HF to VHF. In particular, two-resonator micromechanical bandpass filters have been demonstrated with frequencies up to 35 MHz, percent bandwidths on the order of 0.2%, and insertion losses less than 2 dB. Higher order three-resonator filters with frequencies near 455 kHz have also been achieved, with equally impressive insertion losses for 0.09% bandwidths, and with more than 64 dB of passband rejection. Additionally, free-beam single-pole resonators have recently been realized with frequencies up to 92 MHz and Q's around 8000. Evidence suggests that the ultimate frequency range of this high-Q tank technology depends upon material limitations, as well as design constraints, in particular, to the degree of electromechanical coupling achievable in microscale resonators.
No takes yet. Share an insight, caveat, or question.
Clark T.‐C. Nguyen (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: