Answers are grounded in this paper and cite their sources.
The application of high magnetic field to material processing, so called electromagnetic processing of material (EPM) has been recognized as cutting edge technology, especially in the field of advanced material processing. It is the most effective methods to control thermal, mass and energy transfer during material solidification. A wide-bore conduction-cooled superconducting magnet with operating current of 116 A was designed, fabricated and tested for the material processing devices. The superconducting magnet has the effective warm hole of 18 cm, the maximum center field of 6 T and homogeneity of 5% in diameter of 5 cm. After the Nb/sub 3/Sn coil insert installed, the magnet can provide the maximum center field of 10 T with effective warm bore of 10 cm. A second-stage GM cryocooler with the second-stage cooling power of 1 W is used to cool the superconducting magnet from room temperature to 4.2 K. In this paper, the design, fabrication, test, stress analysis and quench protection characteristics are presented.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: