Answers are grounded in this paper and cite their sources.
A pilot-scale reactor for self-sustained physical activation was integrated into an industrial wood gasification plant (300 kW el ) with the aim of upgrading its carbon-rich by-product, gasification char (GC). The resulting products were activated carbon (AC) and a combustible gas, which was used to generate electricity in the plant’s gas engine . Physical activation of GC is frequently endorsed in literature and has great economic potential. However, a significant research gap remains, possibly due to challenges inherent to GC, including a soft skeleton, high degree of graphitisation , ash content, and reduced porosity. Key achievements include: (i) activation product gas with a heating value of 3.2 MJ/Nm 3 , (ii) maximal theoretical electrical efficiency improvement of the gasification plant by 12.5 %; (iii) a 150 % increase in GC porosity, reaching 661 m 2 /g; (iv) a 400 % improvement in organic micropollutant adsorption capacity compared to GC, achieving approximately 2/3 of the capacity of commercial AC; and (v) significant reduction of polycyclic aromatic hydrocarbons (PAH) content, frequently measuring below broadly recognised threshold values for biochar. This novel co-production of low PAH, high porosity AC and combustible gases represents a promising approach for advancing a carbon negative economy, improving the fuel utilisation rate of gasification plants and producing high value-added products.
No takes yet. Share an insight, caveat, or question.
Gurtner et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: