Answers are grounded in this paper and cite their sources.
Clots of bovine fibrinogen and test thrombin (Behringwerke) were standardized with respect to dry weight and dimensions, placed in a modified Millipore Filter System, exposed to a continuous air stream of high humidity and thus subjected to a slow drying process. The clots collapsed in a symmetrical manner, and their heights were reduced from approximately 8 mm at zero hour to 180-230/μm after 5 hours and to 50/μm after 12 hours of drying. The heights of the collapsed clots were measured after dehydration and embedding in Epon 812. The water content of the clots after various times of drying was determined from the difference of their wet weights and their dry weights which were taken after heat drying at 105°C. If the water content is plotted versus time of drying, a biphasic drying curve results showing the presence of three phases: 1) during the first 3½ hours of the experiment water evaporates at a fast rate, 2) then the curve levels at a water content of approximately 84% water by weight.
No takes yet. Share an insight, caveat, or question.
Köppel et al. (1971) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: