Answers are grounded in this paper and cite their sources.
The design and fabrication of scaffolds play a vital role in ensuring the successful regeneration of bone following fractures or damage caused by accidents or other reasons. Scaffolds with pores of the correct size, shape, and interconnectivity foster cell infiltration, migration, nutrient and oxygen flow, and waste removal. However, increasing pore size can reduce mass density, negatively affecting the scaffold's mechanical properties. Thus, it is essential to design scaffolds with the optimal pore shape and size to withstand mechanical stress. Experiments on biocomposite scaffold blocks without pores under uniaxial compressive loads were conducted. Fluorcanasite glass-ceramic microparticles were integrated into a photocurable surgical grade (SG) resin matrix to develop the biocomposite scaffolds. Various pore shapes, sizes, and densities were modeled using the finite-element software COMSOL 5.3 to study their effects on the elastic modulus and fracture toughness. Scaffold models included pure fluorcanasite and composites with 10% and 20% fiber and fluorcanasite. The representative volume element (RVE) was modeled using experimental load-deformation data. A periodic boundary condition and uniaxial load were applied to assess the influence of pore parameters on the elastic modulus and energy release rate (J-integral). Results showed that pores negatively impacted these properties, but adding fibers improved both the modulus and fracture resistance. This research is valuable for implant industries focused on optimizing pore design for bone scaffold production.
No takes yet. Share an insight, caveat, or question.
Shrivastava et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: