Answers are grounded in this paper and cite their sources.
Fully dense disks, each consisting of a single crystal (111) plate of the relaxor‐based ferroelectric Pb(Mg 1/3 Nb 2/3 )O 3 ‐35 mol% PbTiO 3 (PMN‐35PT) embedded in a 0.48 ± 0.05 µm grain size polycrystalline matrix of the same composition, were formed by hot‐pressing at 950°C for 30 min under 20 MPa. Specimens were subsequently annealed to promote migration of the single‐crystal boundary through the polycrystal (a process termed seeded polycrystal conversion). An anneal of 10 h at 1150°C using PMN‐35PT packing powder resulted in minimal single‐crystal boundary migration, and was accompanied by matrix grain coarsening to 1.86 ± 0.20 µm. In contrast, an anneal of 10 h at 1150°C using PbZrO 3 (PZ) sacrificial powder resulted in significant migration of the single‐crystal boundary through the polycrystal, accompanied by matrix grain coarsening to 13.3 ± 0.3 µm. The shape of the grown crystal relative to the seed plate was consistent with the <111> direction being the fastest growth direction. Based on the grown crystal dimensions, a lower bound <111> growth velocity of 0.14 mm/h was calculated. The increased boundary mobility in the specimen that was annealed using PZ sacrificial powder is attributed to a boundary‐wetting liquid PbO‐based second phase that formed during the anneal. This phase is believed to have formed via PbO absorption from the surrounding vapor phase due to a higher equilibrium PbO vapor pressure above PZ than above PMN‐35PT. The grown single crystal exhibited a promising <100> strain of 0.5% at an applied electric field of 4 MV/m.
No takes yet. Share an insight, caveat, or question.
Khan et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: