Answers are grounded in this paper and cite their sources.
The potential of CO 2 utilization through its injection into blast furnace (BF) tuyeres is studied using the 1D steady‐state zonal model. Scenarios with the injection of CO 2 , hydrogen, and their co‐injection at various H 2 /CO 2 mass ratios are analyzed. The impacts on factors affecting vertical temperature patterns and the position of the cohesive zone in the BF are identified. A life cycle assessment for several scenarios with various carbon emissions intensities of hydrogen production, carbon capture, and grid electricity generation is performed. Injection of CO 2 without the addition of hydrogen increases the coke rate, reduces productivity, and increases direct CO 2 emissions; however, thanks to producing top gas with higher calorific value, injection of CO 2 may reduce the global warming potential (GWP) if the electric grid carbon intensity is above 654 kg‐CO 2 kWh −1 , while carbon capture is powered by green electricity. Although the injection of hydrogen alone would result in a more substantial reduction of GWP from the baseline than the injection of H 2 /CO 2 mix at any mass ratio, considering the identified impacts on heat exchange and the position of the cohesive zone in the BF, co‐injection might be an enabling solution for the adoption of hydrogen injection.
No takes yet. Share an insight, caveat, or question.
Volodymyr Shatokha (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: