Development of a Persistent Current Switch for HTS Magnets

This paper describes design concept, fabrication, and experimental results of a persistent-current switch (PCS) for high temperature superconducting (HTS) magnets. Recently large-size HTS magnets have been fabricated with Ag-sheathed Bi2223 wires. Even in the case of HTS magnets, persistent-current mode has the advantage of maintaining a steady magnetic field for long periods. A PCS for an HTS magnet is a key component to realize persistent-current mode. A PCS for an HTS magnet must work at the same operating temperature as an HTS coil, and electrical resistivity for a PCS conductor should be sufficiently large to reduce the energy dissipation during charge and to shorten the switching time. To satisfy these requirements, a YBCO thin film is adopted for a PCS conductor. The PCS is used in a vacuum and conductively cooled by a cryocooler at around 20 K when the switch is "on". To change the PCS from "on" to "off", the temperature of the PCS is increased to around 100 K by electrical heaters. A new design concept of a PCS for an HTS magnet is introduced. And the test results of rated current operation, switching operation and persistent-current operation are shown.