Answers are grounded in this paper and cite their sources.
The effect of gas bottom-blowing condition on the refining characteristics of a top- and bottom-blowing converter in comparison with that of top-blowing condition has been studied, on the basis of the amount of accumulated oxygen in the converter (Os), which represents the change in oxidation/reduction reactions between hot metal and slag.It is possible to express quantitatively the relationships between hard blow/soft blow by the manipulation of top-blowing jets and strong agitation/weak agitation by that of bottom-blown gas. The manipulation of the flow rate of bottom-blown gas permits to control the blowing reaction more effectively than that of the top-blowing jet.In connection with the above fact, dynamic control of blowing reaction in the top- and bottom-blowing converter has been done, with the flow rate of bottom-blown gas as a manipulated variable and the variation of Os as a controlled variable. By the application of the multistep optimum control theory to the blowing reaction model, the stability of blowing operation and metallurgical characteristics, i.e., the ranges of changes in (T.Fe) of slag, phosphorus and manganese concentration of molten steel at blow end, were narrowed appreciably.
No takes yet. Share an insight, caveat, or question.
ISO et al. (1988) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: