Answers are grounded in this paper and cite their sources.
High Resolution Image Download MS PowerPoint Slide Nitrate (NO 3 – ) contamination is becoming a major concern due to the negative effects of an excessive NO 3 – presence in water which can have detrimental effects on human health. Sensitive, real-time, low-cost, and portable measurement systems able to detect extremely low concentrations of NO 3 – in water are thus becoming extremely important. In this work, we present a novel method to realize a low-cost and easy to fabricate amperometric sensor capable of detecting small concentrations of NO 3 – in real water samples. The novel fabrication technique combines printing of a silver (Ag) working electrode with subsequent modification of the electrode with electrodeposited copper (Cu) nanoclusters. The process was tuned in order to reach optimized sensor response, with a high catalytic activity toward electroreduction of NO 3 – (sensitivity: 19.578 μA/mM), as well as a low limit of detection (LOD: 0.207 nM or 0.012 μg/L) and a good dynamic linear concentration range (0.05 to 5 mM or 31 to 310 mg/L). The sensors were tested against possible interference analytes (NO 2 –, Cl –, SO 4 2–, HCO 3 –, CH 3 COO –, Fe 2+, Fe 3+, Mn 2+, Na +, and Cu 2+ ) yielding only negligible effects [maximum standard deviation (SD) was 3.9 μA]. The proposed sensors were also used to detect NO 3 – in real samples, including tap and river water, through the standard addition method, and the results were compared with the outcomes of high-performance liquid chromatography (HPLC). Temperature stability (maximum SD 3.09 μA), stability over time (maximum SD 3.69 μA), reproducibility (maximum SD 3.20 μA), and repeatability (maximum two-time useable) of this sensor were also investigated.
No takes yet. Share an insight, caveat, or question.
Inam et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: