Answers are grounded in this paper and cite their sources.
Due to the production of huge quantity of potentially toxic and recalcitrant pollutants, which cannot be completely decomposed with conventional biological wastewater treatment processes, in the paper industry, reliable treatment processes are highly required. This study conducted effective experiments of different series of processes to decompose persistent contaminants in the paper wastewater under controlled conditions of the used processes to meet the effluent quality standards of Korea Ministry of Environment in terms of COD Mn (< 130 mg/L). For Biological treatment, Fenton , and photo-Fenton processes, various operational parameters were adjusted to determine the optimal conditions for COD Mn value. Due to large quantity of refractory contaminants in the wastewater, single treatment process was not enough to meet the requirement of COD Mn . Herein, we achieved the goal with two approaches: (1) secondary Fenton oxidation after biological and primary Fenton treatments, and (2) photo-Fenton treatment after biological treatment alone. The secondary Fenton oxidation process is an additional process operated under the same condition of the primary Fenton treatment to treat the effluent from the primary Fenton treatment. Ultimately, the residual COD Mn concentrations of the secondary Fenton and single photo-Fenton treatment were 62.7 and 85.3 mg/L, respectively. However, the secondary Fenton required larger amounts of reagents and produced significant amounts of sludge , which require post-treatment, compared to single photo-Fenton treatment. Therefore, it suggests that the application of photo-Fenton was more efficient than the secondary Fenton in terms of economic feasibility and post-treatment requirement.
No takes yet. Share an insight, caveat, or question.
Nam et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: