Answers are grounded in this paper and cite their sources.
A LiNi 0.5 Mn 1.5 O 4 cathode material with high surface orientation was prepared via a complexing reaction coupled with the elevated-temperature solid-state method. First, a bimetal–organic framework containing Ni 2+ and Mn 2+ ions was synthesized via a self-assembly route using pyromellitic acid (PMA) as a dispersant and complexing agent. This step was followed by calcination with lithium acetate using PMA as a structure-directing agent. The resulting LiNi 0.5 Mn 1.5 O 4 (M-LNMO) cathode material was investigated using X-ray diffraction, transmission and scanning electron microscopies, X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and charge/discharge tests. For comparison, LiNi 0.5 Mn 1.5 O 4 samples were prepared by coprecipitation and the solid-phase method under the same conditions. M-LNMO was highly crystalline with low impurity, uniform grain size, and a preferred orientation in the (111) and (110) planes. Owing to these advantages, the M-LNMO cathode material exhibited overwhelmingly high cyclic stability and rate capability and M-LNMO delivered a capacity of 145 mAh g –1 at a discharge rate of 0.1C and a discharge capacity retention of 86.6% at 5C after 1000 cycles. Even at an extremely high discharge rate (10C), the specific capacity was 112.7 mAh g –1, and 78.7% of its initial capacity was retained over 500 cycles. The superior electrochemical performance, particularly during a low-rate operation, was conferred by improved crystallinity and the crystal orientation of the particles.
No takes yet. Share an insight, caveat, or question.
Yin et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: