Answers are grounded in this paper and cite their sources.
Two graphene-based nanofillers of different sizes were melt mixed with polylactide acid (PLA). Composite films based on graphite nanoplatelets (GNPs) with the largest lateral size showed superior electrical conductivity and a lower percolation threshold after melt-compounding and hot-pressing at room temperature. However, upon annealing in the melt, composites based on GNPs with the smallest lateral size displayed significantly improved electrical conductivity and a decrease in percolation threshold as a result of dynamic percolation while composites based on large GNPs showed hardly any change in conductivity and percolation threshold. Hybrid filler systems based on 5 wt% GNP with variable small/large GNP filler ratios displayed synergistic effects in the formation of a conductive network during thermal annealing, and an optimum filler ratio of 50/50 was found to achieve the highest conductivity after annealing. This annealing-induced increase in particle connectivity for composites based on 5 wt.% hybrid small/large GNPs was also reflected in rheological measurements by the manifestation of a plateau in the storage modulus at low frequencies after annealing while such phenomenon was not observed for nanocomposites solely based on either small or large GNPs at similar loadings.
No takes yet. Share an insight, caveat, or question.
Gao et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: