Answers are grounded in this paper and cite their sources.
The formation of foams of biodegradable poly(ε-caprolactone) (PCL) from CO 2 solutions in molten PCL was investigated. This study included characterization of the CO 2 diffusion and equilibrium solubility in molten PCL in contact with supercritical CO 2 (scCO 2 ). Experiments were performed at 70, 80, and 90 °C at CO 2 pressures up to 25 MPa. The effective mutual diffusivity of CO 2 in molten PCL was measured as a function of the CO 2 pressure. The data revealed a dramatic increase in apparent effective diffusivity at elevated pressure, likely related to the formation of fluid bubbles, phase-separated from the previously homogeneous, molten PCL solution of CO 2 . Microcellular PCL foams were produced by starting from an equilibrium CO 2 −PCL solution at 70 °C over a wide range of initial pressures (from 6.9 to 32 MPa) by quenching down to foaming temperatures (from 24 to 30 °C) followed by rapid depressurization to atmospheric pressure. Foam structures were characterized by scanning electron microscopy, and cell sizes and density were determined quantitatively. The various foam structures were analyzed and interpreted in connection with the independently measured kinetics and equilibrium of CO 2 sorption in PCL by considering the effects of starting pressure and foaming temperature on bubble nucleation and growth.
No takes yet. Share an insight, caveat, or question.
Cotugno et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: