Answers are grounded in this paper and cite their sources.
This study introduces a seminal dual-phase valorization strategy for OPW, where sequential pectin extraction (6.3 % yield) and subsequent application as a biosorbent achieves 96.03 % removal efficiency of DV 35 dye, a previously understudied azo pollutant. Through Response Surface Methodology (RSM) with Central Composite Design, optimal conditions were identified as pH 2.28, 85 mg L⁻¹ initial dye concentration, and 15.84 g L⁻¹ OPW dose, validated by high model accuracy (R² = 0.98, adjusted R² = 0.96). The adsorbent demonstrated exceptional Freundlich isotherm compliance (R² = 0.99), revealing heterogeneous multilayer adsorption with a favorable dimensionless separation factor (0.019–0.006), and achieved a monolayer capacity of 43.84 mg g⁻¹ at 303 K, surpassing prior agricultural waste-based adsorbents. BET (30.276 m²/g surface area), SEM-EDX, and FTIR identified critical functional groups (−OH, −COOH) enabling electrostatic binding with DV 35's sulfonate groups, while pseudo-second-order kinetics (R² = 0.99). Thermodynamic profiling revealed spontaneous (ΔG° = −25.02 kJ mol −1 ) and endothermic (ΔH° = 59.48 kJ mol −1 ) adsorption, driven by entropy (ΔS° = 0.29 kJ mol-1 K −1 ). The process exhibited dual-phase diffusion dynamics: rapid film diffusion (67 % removal within 4 min) followed by pore diffusion, with external film diffusion as the initial rate-limiting step. Present work aligned with circular economy principles by transforming waste into a high-value resource—first extracting pectin, then repurposing residues for dye remediation. This work establishes OPW as a cost-effective, eco-friendly solution for textile wastewater challenges, addressing a critical gap in azo dye adsorption research.
No takes yet. Share an insight, caveat, or question.
Gupta et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: