Elevated temperature aging of HIPS

The effects of aging at 85°C on a rubber‐modified polystyrene (HIPS) have been studied as a function of aging time in both air and nitrogen. Four different types of physical measurements were carried out on the aged samples. These included mechanical relaxation measurements, tensile stress–strain measurements, creep measurements at several stresses, and measurements of fatigue lifetime under applied tension–compression stress. Aging in nitrogen is largely a physical aging process and results in higher modulus, higher tensile strength, and longer delay times to the onset of accelerating creep deformation. But tensile ductility and fatigue lifetime tend to reduce, and there is no change in location of Tg of the rubber phase. Aging in air involves both chemical and physical aging, and the changes that occur depend on which process dominates. For long‐time aging of 150 h or more, the rubber‐phase Tg is shifted to higher temperatures and the associated loss peak is broadened due to crosslinking. Also, the tensile strength, tensile ductility, creep delay time, and fatigue life all reduce. These effects are attributed to oxidative attack and embrittlement. SEM micrographs reveal variations in fracture surface morphology due to the mode of testing and to the aging medium.