This is the authors' abstract. We don't add key points for this paper.
Poly(trimellitimide-melamide-phenol-formaldehyde) (PTMIMPF) copolymers were synthesized through the condensation of the prepolymer N, N’-(4, 4’-diaminodiphenyl ether) bis trimellitimide diacid chloride with melamine in pyridine and aqueous media, followed by reaction with formaldehyde and phenol using microwave irradiation. The pyromellitimide polymer was synthesized by reacting pyromellitic anhydride with 4,4’-oxydianiline, and subsequently, copolymers of pyromellitimide and trimellitimide-melamine were prepared by in situ polymerization. The molecular structure and thermal properties of the copolymerized polyimides were characterized through various spectroscopic and thermal analysis techniques. Differential scanning calorimetry analysis indicated endothermic melting peaks at 325°C and 570°C for polytrimellitimide-melamine (PTMIM), suggesting its suitability for heat shielding applications. Liquid chromatography-mass spectrometry confirmed the presence of melamine, diaminodiphenyl ether, trimellitic anhydride, and pyromellitic anhydride groups, indicative of the cleavage of bonds within the copolymers. The 1H nuclear magnetic resonance spectrum of PTMIMPF revealed aromatic -CH2-N linkages, confirming the condensation polymerization of melamine with formaldehyde-phenol. Aromatic hydrogen peaks for alkyl-substituted benzene rings appeared as multiplets in 6.683-8.275 ppm range. Peaks at 7-7.5 ppm showed unsymmetrical delta H due to aromatic protons, while peaks at 3.695-4.604 ppm indicated the presence of an amide linkage between benzene and melamine. Microstructure and elemental composition analyses of PTMIM, poly(pyromellitimide-melamine), and PTMIMPF copolymers were conducted using energy dispersive X-ray (EDX) spectroscopy and scanning electron microscopy (SEM). To mitigate high heat conduction and erosion, a 2 mm thick coating of thermal insulation polyimide composite (TIPC) of PTMIMPF-SiC-epoxy resin was applied on tungsten pieces layered onto aluminum plates and subjected to infrared heat flux (IR-HF) exposure. The back wall temperature of the TIPC-coated aluminum plate remained at 69°C after 150 seconds of exposure to 10 W/cm² of IR-HF. SEM and EDX analyses before and after the IR-HF exposure revealed larger solid aggregates of trimellitimide connected with phenol formaldehyde and thinner molecules of biphenyl ether, forming a smooth, homogeneous polymer char surface post-exposure that reduced heat conduction to the metallic substrate. This study demonstrates the potential of PTMIMPF copolymers for effective heat shielding applications, validated by comprehensive spectroscopic and thermal analyses, highlighting their promising thermal and structural properties.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Gupta et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: