This is the authors' abstract. We don't add key points for this paper.
为实现真空紫外低温辐射计高精度测量要求,设计并研制了适用于115~200 nm波段真空紫外低温辐射计的内壁镀金膜的高吸收率吸收腔。首先,为验证吸收腔结构参数与吸收率之间关系,采用TracePro光学仿真软件对不同结构吸收腔进行仿真;其次,对镀金膜样片在115~380 nm波段进行了反射率实验测量,并对吸收腔的吸收率在266 nm进行了实验测量;最后,采用光谱归一化方法,实现了真空紫外波段吸收腔吸收率的确定,并对实验结果进行了分析。结果表明: 60°倾角斜底圆柱吸收腔具有更高的吸收率;镀金膜吸收腔在真空紫外波段吸收率达到0.999以上,满足低温辐射计使用要求;吸收腔仿真的吸收率和实测的吸收率之间的偏差为0.000 05,二者的吻合性较好。
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Hongbo et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: