This is the authors' abstract. We don't add key points for this paper.
Blends of polysulfone (PSF) and poly‐phenylene sulfide (PPS) exhibit ductile behavior, below 35% by weight PPS, under tensile loading conditions. However, the blends are notch sensitive to Izod impact. The use of a core‐shell type rubber‐modifier effectively toughens the blends. Notched Izod impact strength rises, from ∼ 50 J/m to about 900 j/m, by increasing rubber content from 0% to 10–15%. It remains constant at a rubber content > 10–15%. Scanning electron microscopy (SEM) is used to study the morphology of the fracture surfaces. At low modifier content (5%), smooth or mesa‐like fracture surfaces are observed. Voids and interfacial debonding are revealed. With a higher concentration of toughening agent (> 10%), some crazing is evidence but not consistent. However, matrix yielding and extensive plastic flow of the PSF/PPS matrix are seen throughout, with a higher level of rubber modifier.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Cheung et al. (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: