Answers are grounded in this paper and cite their sources.
Transparent conductive tin dioxide thin films were prepared by a low-temperature atmospheric-pressure chemical vapor deposition method in air. The raw material was tin(II) trifluoroacetate. At a reaction temperature above 250 °C, polycrystalline thin films were obtained with a high deposition rate. This chemical vapor deposition method effectively incorporates F atoms into a crystalline structure and consequently maximizes the carrier concentration, yielding fluorine-doped SnO2 films of very low resistivity. For the 1260-nm-thick film deposited at 400 °C, the resistivity was 5.92×10−4 Ω cm, and the sheet resistance was 4.69 Ω/⧠. The deposition condition, structure, and characteristics of films were compared to the corresponding values in the chemical vapor depositions of SnO2 from tin(II) acetate.
No takes yet. Share an insight, caveat, or question.
Maruyama et al. (1990) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: