Answers are grounded in this paper and cite their sources.
Low-temperature fabrication of dielectric ceramics with excellent millimeter-wave performance has attracted increasing interest for fifth-generation (5G) wireless communication systems. In this work, room-temperature densified NaCl ceramics were fabricated via a pressure-assisted process, and their potential as dielectric resonators for millimeter-wave antenna devices was explored. The influences of isostatic pressure on the microstructure and dielectric performance of the samples were systematically characterized. The optimized sample prepared under an isostatic pressure of 270[Formula: see text]MPa exhibited the quality factor ([Formula: see text] of approximately 16640[Formula: see text]GHz at 9.9[Formula: see text]GHz and a relative permittivity of about 5.6. In the millimeter-wave frequency range of 25–50[Formula: see text]GHz, the dielectric constant varied between 5.1 and 5.9, while the millimeter-wave dielectric loss tangent remained around [Formula: see text]. Based on the measured dielectric properties, a compact cylindrical dielectric resonator antenna (CDRA) was designed and optimized for the target 5G millimeter-wave band. The fabricated antenna achieved a measured −10[Formula: see text]dB impedance bandwidth from 25.0[Formula: see text]GHz to 28.5[Formula: see text]GHz and a peak gain of 7.5[Formula: see text]dBi, together with stable broadside radiation characteristics. Good agreement between simulated and measured results was obtained. These results demonstrate the feasibility of employing room-temperature densified NaCl ceramics as dielectric resonator materials for millimeter-wave antenna systems and provide a promising route toward low-cost dielectric ceramic devices with simplified fabrication processes.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: