Answers are grounded in this paper and cite their sources.
Variations of gas diffusivity (ratio of gas diffusion coefficients in soil and free air, DS/D0) with air-filled porosity (ε) influence the transport, degradation, and volatilization of reactive gasses in soil systems. We show that the prediction accuracy of the Penman-Millington-Quirk (PMQ) diffusivity model (introduced in Part VII of this series) is often improved significantly by including as a reference point a measured value of the gas diffusion coefficient (Dfc) at a single soil-water potential, ψ, between −100 and −500 cm H20. As a result, the root mean square error of prediction was reduced by 45% (based on individual DS/D0 measurements) and by ≥ 65% (based on mean values of 6 to 9 closely-spaced DS/D0 measurements) for undisturbed soil samples from six differently textured surface soils. Gas permeability is measured more easily and more rapidly than gas diffusivity, and we suggest that a measured value of gas permeability (kfc) at a single soil-water potential, combined with a tortuous tube permeability model and the PMQ diffusivity model, can also be used to improve DS/D0 predictions. For practical use, a relation between the equivalent tube radius (rfc) at ψ = −100 cm H20 and clay content, taken to represent the soil structure-forming ability, is proposed for surface soils. Gas diffusive transport simulations using the DARC numerical model (Part I of this series) verified that the inclusion of a single (Dfc or kfc) measurement in the DS/D0(ε) predictions can improve simulation accuracy significantly. Dfc- and kfc-based diffusivity models require limited measurement effort and seem promising for site-specific simulations of gas diffusion and reaction.
No takes yet. Share an insight, caveat, or question.
Møldrup et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: