Answers are grounded in this paper and cite their sources.
The high‐temperature stability of alumina (Al 2 O 3 ) in argon and argon/water‐vapor (Ar/H 2 O) environments has been investigated. Samples were exposed at temperatures of 1300°C–1700°C for 10 h. The microstructure, flexural strength, and volume all showed significant changes in the Ar/H 2 O environment at 1700°C. Samples also became whiter, because of the oxidation of graphite impurities that had diffused from the hot‐processing dies. In the Ar/H 2 O environment at 1700°C, grain‐boundary etching occurred and was much more severe than in the pure‐argon environment, which was very likely caused by the enhanced formation of gaseous Al(OH) 3 and Al(OH) 2 along grain boundaries. In addition, in the Ar/H 2 O environment, substantial grain growth occurred in the surface vicinity. This grain growth, together with grain‐boundary etching, led to a decrease in flexural strength.
No takes yet. Share an insight, caveat, or question.
Tai et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: