This is the authors' abstract. We don't add key points for this paper.
This study investigates the effects of different low-temperature austempering temperature and time on the phase fraction, morphology, distribution of microstructures and mechanical properties in 67Si2CrNiAlMnMoCu steel. The results indicate that the specimen austempered at 200 °C exhibits the earliest transformation due to the pre-forming martensite acting as nucleation for bainitic transformation and the lath martensite disappears as the austempering temperature and time increasing. The M/A islands decrease slightly in size and exhibit markedly less surface relief when specimen austempered at 240 °C from 9 h to 21 h. In addition, the product of strength and ductility of austempered specimens are all higher than the oiled specimens, especially the specimen austempered at 200 °C for 21 h is ∼1.5 times higher than the oiled one. The impact toughness of the specimen austempered at 240 °C for 21 h is nearly 12 times higher than that of austempered at 200 °C for 3h.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Qian et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: