⌘+K

Pulse Explore Communities Researchers Journals

Home Communities Explore

October 25, 2024Voprosy MaterialovedeniyaOpen Access

Selection of parameters of high-speed thermodeformation of Cr–Ni–Mo steel processing on the basis of imitation modeling

N. A. Kondratiev E. I. Khlusova D. M. Anisimov O. D. Borovskaya

View Full Paper

Ask AI

Bookmark

Share

Abstract

The temperature of the end of finishing stage, cooling rate and coil winding temperature are structure-sensitive parameters for bainite-grade steels in the production of plate less than 10 mm thick. Simulation modeling of high-speed thermo-deformation processing of Cr–Ni–Mo bainitic steel samples has been carried out in order to select the most rational technological modes in continuous hot rolling mills. The influence of strain rate and temperature as well as niobium and vanadium microalloying additives on phase transformations has been investigated.

Discussion

No takes yet. Share an insight, caveat, or question.

Cite This Study

Kondratiev et al. (2024) studied this question.

synapsesocial.com/papers/6aa0fc89ff3204a5ef8d2ff7 https://doi.org/10.22349/1994-6716-2024-117-1-5-19

View Full Paper

Ask AI

Bookmark

Share

Keep reading

Synapse has enriched 5 related papers. Consider them for comparative context:

1Effects of Si and Cr on Bainite Microstructure of Medium Carbon SteelsOriginal Research · 2010 · 48 citations
2Effects of Coiling Temperature on Microstructure and Mechanical Properties of High-strength Hot-rolled Steel Plates Containing Cu, Cr and Ni.Original Research · 2000 · 29 citations
3Effects of cooling rate and strain rate on phase transformation, microstructure and mechanical behaviour of thermomechanically processed pearlitic steelOriginal Research · 2019 · 33 citations
4Comparison of composition, properties and modifying effect in epoxy compositions of natural and synthetic diopside-containing fillersVoprosy Materialovedeniya · Wed,
5On the analysis of physical properties of thermal interfaces based on hexagonal boron nitride and copperVoprosy Materialovedeniya · Wed,

More from Voprosy Materialovedeniya

Formation of structural-phase state of Ti–Al materials with Hf-additives obtained by hydride technologyWed,
Synthesis and structure of compounds of the homological series TinO2n–1 obtained by reduction in a hydrogen environmentTue,
The influence of the granulometric composition of powders of steels and precision alloys and their melting modes by LPBF ON porosityMon,
Influence of thermal treatment of niobium substrate on thermal stability of palladium protective-catalytic coatingMon,
Simulation of stainless ferritic-martensitic and austenitic steel hardening after irradiation in ion accelerator. Part 1. Development of a methodology for determiningthe ion mode irradiation of ferritic-martensitic steelsWed,