Answers are grounded in this paper and cite their sources.
A compact and wideband common-mode filter is newly proposed to embed in a cable-attached printed circuit board (PCB) or packages for the suppression of the common-mode noise and its resulting electromagnetic interference (EMI) emission from the attached cable. The proposed filter consists of a pair of distributed signal lines on the top of a mushroom-like structure. Owing to its symmetry, an equivalent circuit model is developed and applied efficiently for this filter design. As an example, a filter prototype is designed and fabricated on a multilayer PCB. The filter prototype shows that it can greatly reduce the common-mode noise over 10 dB from 1.65 to 5.2 GHz. In addition, the corresponding fractional bandwidth is over 100% while the electrical size of the prototype is only 0.11 × 0.11 λg, where λgis the wavelength of the central frequency of its stopband. Also in the time domain, this filter prototype can reduce over 60% of the unintended noise. More importantly, the differential-signal integrity, in terms of the insertion loss in the frequency domain and the eye diagram in the time domain, is maintained up to 7 GHz. To the best of our knowledge, it is the first embedded common-mode filter proposed for gigahertz differential signals with such a large bandwidth and the most compact size. To further demonstrate the ability of the filter to suppress the common-mode current on the attached cable and the corresponding EMI emission, a test board design is also introduced and realized. From the experimental results related to this test board, a 10-dB suppression on average is indeed achieved.
No takes yet. Share an insight, caveat, or question.
Hsiao et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: