Answers are grounded in this paper and cite their sources.
Single-crystalline Pt (SC-Pt) films 15–60 nm thick with an atomically flat surface were coherently grown on SrTiO 3 (100) substrates by rf magnetron sputtering using Ir buffer layers. In the epitaxial growth of PbTiO 3 films on SC-Pt films by metalorganic chemical vapor deposition, square nanoislands with heights of 3–30 nm and widths of 30–200 nm were grown by self-assembly at the initial growth stage, and subsequently, a continuous film was formed, indicating the Volmer–Weber growth mode. The minimum thickness required to form a continuous PbTiO 3 film on SC-Pt films was 50 nm, which is much smaller than the 100 nm thickness on partially relaxed Pt films. Piezoresponse force microscopy revealed that piezoelectric constants of PbTiO 3 nanoislands with heights below 10 nm were distinctly dependent on the height rather than the aspect ratio, suggesting intrinsic size effects of the piezoelectric constant. Continuous PbTiO 3 films with thicknesses down to 50 nm exhibited saturated hysteresis loops with remanent polarizations of 57–64 µC/cm 2 and coercive fields of 166–275 kV/cm.
No takes yet. Share an insight, caveat, or question.
Fujisawa et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: