Answers are grounded in this paper and cite their sources.
Abstract—The phase composition and the static and fatigue mechanical properties of austenitic–martensitic VNS9-Sh (23Kh15N5AM3-Sh) TRIP steel at studied at various stages of cold drawing, from a diameter of 2.4 mm to a diameter of 0.36 mm, which corresponds to an overall reduction (cumulative strain) of 31.5 and 86%, respectively. As the cumulative strain increases from 31.5 to 45%, the fraction of martensite in the material volume is found to increase from 15 to 20.4% at a comparable strength level (1800–1850 MPa), the yield strength increases, and the relative elongation decreases. At an identical phase composition (15–20.4% martensite in the volume and at most 14% at the surface) and a comparable tensile strength (1800–1850 MPa), the fatigue characteristics of a wire 0.95 mm in diameter are higher than those of a wire 2.4 mm in diameter.
No takes yet. Share an insight, caveat, or question.
Prosvirnin et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: