Answers are grounded in this paper and cite their sources.
Experimental study demonstrates composition-dependent strength in 3D-printed PETG composites, indicating optimal mechanical balance at 7.5 weight percent carbon fibre.
Polyethylene terephthalate glycol–carbon fibre composite filaments are widely used in fused deposition modelling because of their good strength, stiffness and dimensional stability. In the present study, polyethylene terephthalate glycol–carbon fibre composite filaments were developed by incorporating carbon fibre into polyethylene terephthalate glycol at different weight percentages of 2.5, 5, 7.5 and 10 wt.%. The developed filaments were subsequently processed using fused deposition modelling to fabricate specimens for systematic evaluation of their mechanical, water absorption and microstructural characteristics. Tensile, compressive and flexural tests were conducted to investigate the influence of carbon fibre content on the mechanical performance of the fabricated composites. The results indicate that the incorporation of carbon fibre significantly influences the tensile, compressive and flexural properties of polyethylene terephthalate glycol. Among the investigated compositions, the 92.5%PETG + 7.5%CF composite exhibited the highest tensile strength of 44.58 MPa and flexural strength of 70.01 MPa, while the 90%PETG + 10%CF composition exhibited the highest compressive strength of 55.85 MPa. Water absorption analysis showed that the 92.5%PETG + 7.5%CF composition exhibited the lowest weight gain of 0.23%. Scanning electron microscopy analysis revealed the influence of fibre dispersion, interfacial bonding, fibre pull-out and localized void formation on the mechanical behaviour. The results show that the developed polyethylene terephthalate glycol–carbon fibre compositions exhibit composition-dependent mechanical and moisture-resistance characteristics, with 92.5%PETG + 7.5%CF providing the best overall balance among the investigated compositions.
No takes yet. Share an insight, caveat, or question.
Nallusamy et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: