Answers are grounded in this paper and cite their sources.
The results of hardening modification of cured polymer composite materials in a microwave electromagnetic field have been analyzed. It has been shown that a necessary factor for obtaining the desired effect is a combination of the energy flux density and exposure time, which ensure heating of a material to a temperature of 60–80°C. Drawbacks of the microwave modification in electron beam chambers with sequential emitters have been noted and the microwave hardening modification of large-sized polymer composite products by discrete movement (scanning) of a horn emitter over the product surface with a delay at each scanning step has been proposed. The temperature field distribution over the irradiated surface at different scanning schemes has been experimentally investigated. A rational value of the overlap of the radiation pattern areas with the maximum energy flux density at each scanning step has been found to be 25%, which ensures uniform heating of the product surface with a spread of no more than ±5°C and eventually makes it possible to implement a uniform distribution of the mechanical properties of the modified structure.
No takes yet. Share an insight, caveat, or question.
Злобина et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: