Answers are grounded in this paper and cite their sources.
This work offers the approach to exploit simple and cost-effective low-temperature annealing treatment to simultaneously enhance of hardness, corrosion and biological response of the ultra-fine grained commercially pure titanium (UFG CP-Ti) fabricated by multiple-pass cold rolling technique. Performed investigations revealed that improvement of all of these characteristics was possible by subjecting UFG CP-Ti to the heat treatment with parameters 250 °C/15 min. Hardening (for about 4.2 %) was governed by both partial recovery process of UFG structure and segregation of impurities atoms during annealing. Thereby, this beneficial effect was achieved only in titanium with a certain level of impurities (UFG Ti Grade 2). Enhancement of the corrosion resistance in fluoridated medium (increase of the passive layer resistance Rp from 0.28 ± 0.16 to 3.48 ± 0.18 MOhm*cm2) and osteoblast-like response was closely related to the thermally-induced changes in the passive layer characteristics e.g. growth of its thickness (from c.a. 6 to 11 nm) and changes in the nanotopography (increase arithmetic deviation of surface roughness Ra from 5 ± 1 to 10 ± 2 nm). Overall results indicate that the low-temperature annealing is an effective way to improve both bulk and surface properties of biomedical UFG CP-Ti, which could be easily transferred to the industrial scale.
No takes yet. Share an insight, caveat, or question.
Sotniczuk et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: