Answers are grounded in this paper and cite their sources.
A highly miniaturized piezoresistive humidity sensor has been developed. The starting point of the development was a 1 × 1 mm2 piezoresistive pressure sensor chip. As sensing material, a polyimide was used that swells with increasing adsorption of water molecules. To convert the swelling into an electrical signal, a thin layer of the polyimide was deposited onto the bending plate of the pressure sensor. The humidity sensor was characterized in a climate chamber. The measurements show a sensitivity of 0.25 mV per percent relative humidity (%RH) and a non-linearity of 3.1% full scale (FS) in the range of 30–80% RH. A high cross-sensitivity to temperature of around 0.5 mV °C−1 was measured, so temperature compensation is necessary. For stress-free packaging of the sensor chip, a novel packaging technology was developed.
No takes yet. Share an insight, caveat, or question.
Waber et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: