Answers are grounded in this paper and cite their sources.
The usage of magnesium alloys is limited because of their deprived tribological performance. Hence, the extant effort is to develop the AZ91 matrix composites augmented with 12[Formula: see text]wt.% zirconium diboride (ZrB 2 ) through the stir casting route. Metallurgical examinations depicted the presence and scattering of the ZrB 2 in the matrix with no defects and pores. A pin-on-disc device was used in the dry sliding wear tests, which were conducted on hardened counter discs. The experiment was performed according to Taguchi’s L9 array by utilizing three factors, such as load [Formula: see text], sliding velocity [Formula: see text], and sliding distance [Formula: see text]. The gray relational analysis has been employed to predict the wear rate (Wr) and coefficient of friction (CF) for the synthesized composite. Analysis of variance (ANOVA) was used to find out the consequences of the involved variables on the outputs. The experimental finding shows that the lower Wr and CF were produced at 10[Formula: see text]N of L, 2[Formula: see text]m/s of V, and 1500[Formula: see text]m of D. ANOVA results indicate that L has the most consequence that affects the Wr and CF, followed by D and V, respectively.
No takes yet. Share an insight, caveat, or question.
Upadhyay et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: