Answers are grounded in this paper and cite their sources.
This study evaluates cutting force, microhardness, cutting temperature, chip morphology, specific cutting energy and tool wear under dry cutting, minimum quantity lubrication (MQL) and nano minimum quantity lubrication (NMQL) environments. Mahua oil mixed with hybrid nanoparticles (h-BN and MXene) was employed to study machining performance of aerospace alloy. Adding h-BN nanoparticles to mahua oil improved the cutting fluid's physicochemical, thermal, and lubricating properties. Two cutting speeds, 200 and 250 m/min, were utilized while keeping a constant feed rate of 0.12 mm/rev and a depth of cut (DOC) 1 mm. Findings showed that dry cutting produced the highest cutting forces, cutting temperature, and high tool wear than MQL and NMQL because of high friction and insufficient heat dissipation at the tool-chip contact. Scanning electron microscopy (SEM) investigation demonstrated built-upedge (BUE), flank wear and plastic deformation under dry environments. The implementation of the hybrid nanofluid strategy significantly reduced specific cutting energy to 17.17 KJ compared to specific cutting energy 21 KJ under dry mode. NMQL achieved around a 62% reduction in tool wear compared to dry cutting and around a 40% reduction compared to MQL. In all, NMQL was shown to be the best performing and sustainable cooling-lubrication approach for improving machinability while turning Al7075-T6 alloy.
No takes yet. Share an insight, caveat, or question.
Singh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: